BMW325TI
About
- Username
- BMW325TI
- Joined
- Visits
- 878
- Last Active
- Roles
- Member
Comments
-
Sorry to say mate, the only way is to try out. I am 1,70 meter tall. Riding on Bont 12,8 3x125 frame. For me it is same feel as 12,6. Also riding on 4x110, turns are tighter and faster due of 4x110😀
-
Good to hear mate, good luck with those. Looks new :-)
-
I thought so it is 2 point mount system when looked at your first picture. Good to hear it is good fit, but just keep in mind in will loose a little a bit when breaking in. I hope you will enjoy 3x15mm, because it needs more technique, strength and…
-
I can only say don't give up. Training legs is hard and take very long time to see results.
-
Yes if your has same mountings holes length.
-
Just aware of Powerslide trinity system, very small margins of adjustment. And it is not that low they advertised! So I sent it back when hought Powerslide Puls trinity. I like standard mounting system better more choice, more adjustment, cheaper. A…
-
For rough surface I like 4x110 better. Less sticking to cracks in roads. With 3x125 you have keep eyes open, before you know you are laying on ground. For best control:speed ( agressive speed skating) I like 4x100. I had endurance pro, build qualit…
-
How does semi custom works? just flat shape of your footprint or also arch height?
-
Also I took more attention for technique, less ankle hurt. And spot heatmolding using back of screwdriver to push out....
-
Don't really know I haven't measured. But for me Luigino Strut, Bolt and Challenge works best for me. The look high, but that is just microleather. They still hurts, so I heatmolded them to loose fit... I had Maple Mpl 1, carbon and microleather sam…
-
Nice ones! Custom made?
-
I had Endurance Pro 125 (1st version). They run a little bit small in width and not suitable for high arch feet. Looking at build quality is better than Powerslide. As sizing I wearing shoe size 40 and RB 40,5 fits fine.
-
Yeah I am a hobbit too (1,7m). I took some time to adapt 125mm wheels. Riding on 4x110 is more fun, no stuck when riding on bad road. I prefer riding on pedestrian area (not smooth), don't like the idea to hit a car when on road.
-
Yes i have been skating on 62mm to 125mm. I have bought Bont Cxxv 12,8" frame. It seems this frame is more balanced with body load to wheels. With RB frame I can wheel center wheel very well ( more loaded) and loose some grip during pushes. I…
-
Nice skills you have really like your paint job!😍
-
Thanks, I have heard of that guy before. Not really informative, more commercial making..... I prefer knowledge of this forum :-)
-
Also another brand of Powerslide https://www.chayaskates.com/Kids
-
E.g. Powerslide (playlife) etc make tiny skates with rubber wheels.
-
Very simple, cheap, anywhere possible 》planking.
-
I have been rolling on 110 for a while now. I can feel pushes are much stronger and end speed is higher. I can conclude 3x125 is only suitable for real smooth surface.
-
Yeah totally agree form is important. But using form doesn't mean it will lead you to success I mean e.g. double push doesn't mean let you win. It also person itself his strength and his own or learned form are important.
-
I have been using ankle socks/footies. I feel with ankle socks, controlling is less responsive. I have better results with thin compression socks. But like taste, fitment is for everyone different...
-
I have molded my boots tight at ankle area. But after long sessions with 125mm ankles bones hurt. So remodelled to a little bit loose fit. And pay more attention to stand in balance.
-
Haha I wish you are right, after few sessions wheels are pretty worn out. And breaking with dragging doesn't help too to extend lifespan. I can feel flex after long ride or next day training again. So ankles need more strength to overcome these sit…
-
Thanks for info. In mine case I really have a lot of energy , but cant use them right....😪
-
Yes totally agree, i cant judge myself. I think I am doing double push but i cant do all the time. While it asked a lot of energy. Thanks for sharing links, will have a look.
-
Yeah good luck. Have fun with trying out.
-
I had Fr1 and Fila Nrk carbon, both skates cuffs were placed to forward positions. So I could more have flex forward. As these cuffs are very high and stiff, dont expect too much differences. As you said, loosing cuff give you more movements freedo…